6-12-12 Fall Arbor Liquid Fertilizer

Slow Release

With Humates and Minor Elements

guaranteed analysis

Total Nitrogen (N) 6.0%
1.50% Slowly Available Water Soluble Nitrogen
3.00% Urea Nitrogen
1.50% Ammoniacal Nitrogen

Available Phosphate (P2O5) 12.0%
Soluble Potash (K2O) 12.0%

Secondary Elements:

Iron (Fe) 0.10%
Manganese (Mn) 0.05%
(Water Soluble Mn)
Zinc (Zn) 0.05%
Humates at 1% per total weight

Nutrients derived from: Methylene urea, Urea, Ammonia, FeEdta, Manganese Edta, Zinc Edta, Phosphoric Acid and Potassium Hydroxide.

(2 x 2.5 GAL JUG/CASE )
NET WT. 52.5 LB.
KEEP FROM FREEZING

A specialty fertilizer blended specifically for application on trees and ornamentals in the practice of professional arboriculture.

A true concentrated liquid for easy mixing & application. For root injection, soil drench, or foliar spray application. This solution has a low salt index and is compatible with fungicides & pesticides.

Mixing Rates:

1.25 gallons (1/2 jug) 100 gallons
2.5 gallons (1 jug) 200 gallons
5 gallons (2 jugs) 400 gallons

Application Rates:

90% of feeder roots are in the top 12 inches of soil with the majority in the first 6 inches. Start your application approximately 2 to 4 feet from the root flare and extend to beyond the drip line. The soil should be inoculated with a root probe going 4 to 6 inches deep from a power rig set at approximately 150 to 200 PSI, depending upon the porosity or density of the soil. The root area of the tree should be injected in a grid or in concentric circles spacing 3 feet apart. Inject approximately ½ gallon of solution per injection site. Based on the 3 feet spacing this should put around 150 gallons. Site and soil conditions vary, so adjust your application accordingly. Shake before using.