50% SLOW RELEASE
WITH MINOR ELEMENTS

GUARANTEED ANALYSIS

Total Nitrogen (N) 20.00%
10% Slowly Available Water Soluble Nitrogen*
10% Urea Nitrogen
Soluble Potash (K20) 6.0%
Copper (Cu) 0.03%
0.03% Chelated Copper (Cu)
Iron (Fe) 0.06%
0.06% Chelated Iron (Fe)
Manganese (Mn) 0.03%
0.03% Chelated Manganese (Mn)
Zinc (Zn) 0.03%
0.03% Chelated Zinc (Zn)

Derived from: Urea Triazone, Urea, Potassium Carbonate, Potassium Thiosulfate, Copper EDTA, FeEdta, Manganese Edta, Zinc Edta.

*Slowly available Nitrogen from Urea Triazone

2.5 GALLONS PER JUG
NET WT. 26.25 LBS. PER JUG
PACKED: 2 JUGS PER CASE 52.5 LBS.
KEEP FROM FREEZING

A specialty fertilizer blended specifically for application on trees and ornamentals in the practice of professional arboriculture.

A true concentrated liquid for easy mixing & application. For root injection, soil drench, or foliar spray application. This solution has a low salt index and is compatible with fungicides & pesticides.

MIXING RATES
1.25 gallons (1/2 jug) 100 gallons
2.5 gallons (1 jug) 200 gallons
5 gallons (2 jugs) 400 gallons

APPLICATION RATES
90% of feeder roots are in the top 12 inches of soil with the majority in the first 6 inches. Start your application approximately 2 to 4 feet from the root flare and extend to beyond the drip line. The soil should be inoculated with a root probe going 4 to 6 inches deep from a power rig set at approximately 150 to 200 PSI, depending upon the porosity or density of the soil. The root area of the tree should be injected in a grid or in concentric circles spacing 3 feet apart. Inject approximately ½ gallon of solution per injection site. Based on the 3 feet spacing this should put around 150 gallons over 2,000 sq. ft. Site and soil conditions vary, so adjust your application accordingly. Shake before using.