100% SOLUBLE FOR CONTINUOUS LIQUID FEED PROGRAMS

GUARANTEED ANALYSIS

Total Nitrogen (N)* 5.00%
1.08% Ammoniacal Nitrogen
3.82% Nitrate Nitrogen
Available Phosphate (P2O5) 11.00%
Soluble Potash (K2O) 26.00%
Magnesium (Mg) 3.00%
3.00% Water Soluble Magnesium
Sulfur (S) 6.97%
6.97% Combined Sulfur (S)
Boron (B) 0.01%
Copper (Cu) 0.02%
0.02% Chelated Copper (Cu)
Iron (Fe) 0.30%
0.30% Chelated Iron (Fe)
Manganese (Mn) 0.05%
0.05% Chelated Manganese (Mn)
Zinc (Zn) 0.02%
0.02% Chelated Zinc (Zn)

NUTRIENTS DERIVED FROM: Potassium Nitrate, Ammonium Nitrate, Monopotassium Phosphate, Potassium Sulphate, Magnesium Sulphate, Boric Acid, Sodium Molybdate, Iron EDTA, Copper EDTA, Manganese EDTA, Zinc EDTA.

Potential Basicity: 215 lbs. Calcium carbonate equivalent per ton.

Warning – Product contains molybdenum. Do not apply to crops that will be grazed by ruminant animals.

Information regarding the contents and levels of metals in this product is available on the internet at http://aapfco.org/metals.html

NET WT. 25 LB.

For best results, use warm water to dissolve product. Doggett’s fertilizers are made with 100% soluble raw materials that will form a true solution. Some raw materials are slower to dissolve than others. Keep stock tank covered to reduce light and debris inputs.

MIXING INSTRUCTIONS
Amount of dry fertilizer (oz.) to add to each gallon of water to make a concentrated solution. Check injector setting before use.

NITROGEN PARTS PER MILLION

 Injector SettingE.C. Value
Desired N Feed Rate1:151:1001:200(mmhos)
50 ppm2.520.040.0.15
100 ppm5.040.0-.30
200 ppm10.0--.60

Limit of solubility = 3 lbs. per gallon

IMPORTANT NOTES
E.C. value is the best method to determine fertilizer strength. Fertilizer appearance may vary in color due to variation in raw material size and tracer dye distribution upon the particles in the bag. In solution, color will remain consistent.

Follow these steps for a precipitate free solution.

  1. Dissolve 130 ounces (8lbs. 2 oz.) of DOGGETT’S HYDROPONIC CLASSIS 5-11-26 in 1,000 gallons of final feed solution. You will obtain the following elemental PPM concentrations:

ELEMENTNPKMgSO4FEMnZnCuBMo
PPM5052215632463.50.15.15.50.10

  1. Test to determine if additional Epsom salts required before proceeding. For most crops 50-75 PPM magnesium is desirable in the final solution. If additional magnesium level is required, dissolve Epsom salts into tank. One ounce of Epsom salts dissolved in 1000 gallons provides 7.5 PPM magnesium.
  2. Dissolve 86 ounces of Calcium Nitrate into the above 1,000 gallon solution to obtain a total nutrient concentration of 150 PPM Nitrogen and 116 PPM Calcium.