STABILIZED NITROGEN TECHNOLOGY FOR EXTENDED RELEASE
Total Nitrogen (N)* 16.00%
12.12% Urea Nitrogen
3.88% Ammoniacal Nitrogen
Available Phosphate (P2O5) 32.00%
Soluble Potash (K2O) 16.00%
Magnesium (Mg) 0.05%
0.05% Water Soluble Magnesium
Sulfur (S) 2.82%
2.82% Combined Sulfur (S)
Boron (B) 0.01%
Copper (Cu) 0.05%
0.05% Chelated Copper (Cu)
Iron (Fe) 0.10%
0.10% Chelated Iron (Fe)
Manganese (Mn) 0.05%
0.05% Chelated Manganese (Mn)
Zinc (Zn) 0.05%
0.05% Chelated Zinc (Zn)
Non-plant food ingredients: Hydrexx 0.65% by Total Wt.
NUTRIENTS DERIVED FROM: Urea, Monoammonium Phosphate, Monopotassium Phosphate, Potassium Sulphate, Magnesium Sulphate, Boric Acid, Iron EDTA, Copper EDTA, Manganese EDTA and Zinc EDTA.
Information regarding the contents and levels of metals in this product is available on the internet at http://aapfco.org/metals.html
NET WT. 25 LB.
For best results, use warm water to dissolve product. Doggett’s fertilizers are made with 100% soluble raw materials that will form a true solution. Some raw materials are slower to dissolve than others. Keep stock tank covered to reduce light and debris inputs.
E.C. value is the best method to determine fertilizer strength. Fertilizer appearance may vary in color due to variation in raw material size and tracer dye distribution upon the particles in the bag. In solution, color will remain consistent.
NEWLY SEEDED TURF
Apply 1.3 lbs. of 16-32-16 per 1,000 sq. ft. every week to 10 days until new seeds are established.
TANK MIXING RATES FOR PPM
Amount of dry fertilizer (oz.) to add to tank to make a ready-to-use solution. Check injector setting before use.
NITROGEN PARTS PER MILLION
|PPM||OZ / 10 gal||OZ / 100 gal|
GENERAL MIXING RATES
|HYDRO STARTER 16-32-16||Water||Area Treated|
|1 level Tablespoon||1 gallon||4 sq. ft.|
|5 level Tablespoons||5 gallons||20 sq. ft.|
|8 ounces||25 gallons||100 sq. ft.|
|2 pounds||100 gallons||400 sq. ft.|
TURF RATES PER LB. OF PHOSPHATE
|Desired lbs. of Phosphate per 1,000 sq. ft.||Fertilizer required in ounces|
Apply Fertilizer in 2-6 gallons of water per 1,000 sq. ft.